DMR 50-5/50 Installation Guide V3.0 Pag. 5
3
Safety Information
In order to achieve the optimum, safe operation of the MDR servo drive, it is imperative that you
implement the safety procedures included in this installation guide. This information is provided to protect
you and to keep your work area safe when operating the MDR and accompanying equipment. Please read
this chapter carefully before you begin the installation process. Before you start, ensure that all system
components are connected to earth ground.
Electrical safety is provided through a low-resistance earth connection. Only qualified personnel may install,
adjust, maintain and repair the servo drive. A “qualified person” has the knowledge and authorization to
perform tasks such as transporting, assembling, installing, commissioning and operating motors.
The DMR servo drive contains electrostatic-sensitive components that can be damaged if handled
incorrectly. To prevent any electrostatic damage, avoid contact with highly insulating materials, such as
plastic film and synthetic fabrics. Place the product on a conductive surface and ground yourself in order to
discharge any possible static electricity build-up. To avoid any potential hazards that may cause severe
personal injury or damage to the product during operation, keep all covers and cabinet doors shut. The
following safety symbols are used in this manual:
Warning:
This information is needed to avoid a safety hazard, which might cause bodily
injury.
Caution:
This information is necessary for preventing damage to the product or to other
equipment.
Note:
This is auxiliary information that ensures the correct operation of the
equipment.
