DMR 50-5/50 Installation Guide V3.0 Pag. 8
3.3
Directives and Standards
The DMR 50-5/50 servo drive conforms to the following industry safety standards:
Safety Standard
Item
Designed in Compliance with UL508c
and UL840
Conformance to the following safety
standards:
•
Power Conversion Equipment
•
Insulation Coordination, Including
Clearance and Creepage distances of
electrical equipment
Designed in compliance with UL60950
(formerly UL1950)
Safety of Information Technology Equipment,
Including Electrical Business Equipment
In compliance with EN60204-1
Low Voltage Directive, 73/23/EEC
3.4
CE Mark Conformance
The DMR 50-5/50 servo drive is intended for incorporation in a machine or end product. The actual end
product must comply with all safety aspects of the relevant requirements of the European Safety of Machinery
Directive 98/37/EC as amended, and with those of the most recent versions of standards EN60204-1 and
EN292-2 at the least.
According to Annex III of Article 13 of Council Directive 93/68/EEC, amending Council Directive 73/23/EEC
concerning electrical equipment designed for use within certain voltage limits, the DMR 50-50/50 meets the
provisions outlined in Council Directive 73/23/EEC. The party responsible for ensuring that the equipment
meet the limits required by EMC regulations is the manufacturer of the end product.
3.5
Warranty Information
The products covered in this manual are warranted to be free of defects in material and workmanship and
conform to the specifications stated either within this document or in the product catalogue description. All
Motor Power Company products are warranted for a period of 12 months from the time of shipment. No
other warranties, expressed or implied — and including a warranty of merchantability and fitness for a
particular purpose — extend beyond this warranty.
