DMR 50-5/50 Installation Guide V3.0 Pag. 21
6.1
Schematic circuit for power and logic supply
CAUTION:
Peak current by switching-on of a variety of series-connected motors.
Consequence:
Destroying of the integrated electronics possible.
►
Using an adequate power supply.
Figure 6: Power supply schematic
The number of devices you can daisy chain depends on the application, the wire size and the power
supply.
7
Default I/O Functionality
7.1
Run/Stop
This is the signal to use to enable disable the Device. Please consider that for encoder version 1s delay
have to be considered at the first startup, to allow the current phase identification.
