DMR 50-5/50 Installation Guide V3.0 Pag. 13
5
Wiring
5.1
Connector XP1 – Power Supply
The Connector Type is WAGO 236-404
The recommended power wires are fine-stranded conductor with ferrule plastic collar 0,25-1,5 mm
2
Pin Function
Description
1
VP+
Power Supply 48Vdc
2
GND
0 Vdc
3
GND
0 Vdc
4
VL+
Logic Supply 24Vdc
48 V dc switched-mode power supply, which can accept an overcurrent to handle the peak for 3 to 5s is
recommended.
The 24 Vdc Logic supply is protected with a 1 A fuse.
Please provide a power supply that has enough power to in support the application.
Use Different power supply for Logic and Power. Motor Regeneration can damage the
24V Input Logic.
To avoid Voltage Drop please use always the maximum allowed wire size.
