•
take the engine back to idle and check
the depression values so that they are
aligned between the two cylinders.
Otherwise, open only the screw with
higher depression, using the by-pass
screws, to compensate.
If there is a larger difference:
•
work on the set screw of the throttle
body connecting rod to reduce the
pressure difference in the two pipes.
•
Repeat the procedure "Throttle posi-
tion autodetection" as explained
above.
•
Bring the engine back to idle and check
the depression values so that they are
aligned between the two cylinders.
•
Otherwise, open only the screw with
higher depression, using the by-pass
screws, to compensate.
Recovery function
If the signal of the following sensors is interrupted, the control unit determines some values to keep the
engine running or it uses a different parameter. The instrument panel and the Axone also signal the
problem.
RECOVERY
FUNCTION
Specification
Desc./Quantity
air temperature
25 °C (77 °F)
engine temperature
30 °C (86 °F)
with linear increase from the air temperature at ig-
nition
barometric pressure
1010 hPa
throttle valve potentiometer
2.9° at idle, otherwise variable.
idle motor
fixed value variable depending on the vehicle
Using axone for injection system
Injection
STELVIO 4V - 1200
Power supply
P SUPP - 5
Summary of Contents for Stelvio 1200 4V
