MOTO GUZZI Stelvio 1200 4V, Service Station Manual

Page: 116 / 135

Specification Desc./Quantity
indicates if the control unit consents engine start-
up
RUN / STOP switch Run / stop
indicates the position of the safety switch
Clutch No / Yes
indicates the clutch sensor status
Gear engaged No / Yes
indicates the gear sensor status
Fall sensor Normal / Tip over
indicates the vehicle fall sensor status
Lambda Open loop / Closed loop
Indicates if the control unit is using (CLOSED) the
lambda probe signal to keep the stoichiometric
combustion. At idle CLOSED only if: Air T over 20°
C (68°F) and engine T over 30°C (86°F) and en-
gine on for at least 2-3 minutes
Synchronisation Synchronised / Not synchronised
Indicates if the control unit detects the revolution
sensor signal correctly
Devices activation screen page
DEVICES ACTIVATION
This displays is used to delete errors in the control
unit memory and activate some systems control-
led by the control unit
DEVICES ACTIVATION
Specification Desc./Quantity
Left coil operation for 2.5 m, 5 times
Right coil operation for 2.5 m, 5 times
Left injector Operation for 4 m, 5 times
Right injector Operation for 4 m, 5 times
Error clearing By pressing the 'enter' button, the stored errors
(MEM) become part of the historical data (STO).
In the next connection between the Axone and the
control unit, the historical errors (STO) are no lon-
ger shown
Fuel pump Operation for 30''
Stepper control For 4'', advancement control of 32 steps; for the
next 4'', retrocession control of 32 steps and so on
for 30''
Power supply
STELVIO 4V - 1200
P SUPP - 8