Moog G392-004, Operation Manual

Page: 43 / 84

MSD Servo Drive AC-AC Operation Manual
moog
43
Id. no.: CA65642-001 Date: 03/2012
[
Commissioning
]
to t
he g
lo
ss
ar
y
to t
he t
ab
le o
f c
on
te
nt
s
4 Commissioning
4.1 Notes for operation
ATTENTION!
• Notes on safety
During operation pay attention to the notes on safety in chapter 1.
•
During operation
Strictly avoid that ...
− foreign objects or moisture enters into the device
− aggressive or conductive substances are in the vicinity
− ventilation openings are covered
•
Cooling
− The device heats up during the operation and the temperature on the
heat may reach +100 °C (+212 °F). Danger of skin injury when touching.
− Cooling air must be able to flow through the device without restriction.
!
4.2 Initial commissioning
Once the MSD Servo Drive AC-AC has been installed as described in chapter 2. and
wired with all required voltage supplies and external components as described in
chapter 3., initial commissioning can performed in the following sequence:
Step Action Comment
1.
Installation and start of PC software
see Installation Manual
Moog D
rive
A
DministrAtor
5
2.
Switching on control voltage see section 4.2.1
3.
Connection between PC and servo drive see section 4.2.2
4.
Parameter setting see section 4.2.3
5.
Drive control with
Moog D
rive
A
DministrAtor
5
see section 4.2.4
NOTE: Details concerning STO (Safe Torque Off) have not been taken into
account for initial commissioning. You will find all information on the “STO”
function in the 24-language document “Description of the STO Safety
Function” (Id. no. CB19388).