RP424PFC Indoor Gas Fireplace
Page 55
XG0781 - 151104
Maintenance
Replacing Light Bulbs
The halogen light bulbs in the
RP424PFC
can be replaced by
following the steps below. If a single bulb has to be replaced, we
recommend replacing all bulbs to reduce frequency of servicing. See
Unit Specifications
for bulb type and wattage.
Disconnect power from the unit and allow to cool prior to servicing.
Step 1:
Remove the glass barriers. See
Section 10
for installation
and removal of glass barriers.
Step 2:
Remove the burner media. See
Section 9
for installation
of accessories.
Figure 107.
Pilot end of burner tray.
Figure 108.
Front end of the burner tray.
Step 3:
Remove the brackets at both ends of the burner media tray.
Note:
It is not necessary to remove the Pilot cover to remove the
Burner Tray.
Figure 109.
Step 4:
Remove the burner tray.
Figure 110.
Step 5:
Remove the halogen bulb.
Note:
DO NOT handle halogen
bulbs with bare hands as it can shorten the life of the bulb. We
recommend using a pair of cotton gloves when handling bulbs.
Installation is the reverse of removal.
