RP424PFC Indoor Gas Fireplace
Page 5
XG0781 - 151104
Installation
Section A: Before You Begin
Introduction
Rating label sample: Natural Gas Sample Shown
Installation and repairs should be done by an authorized gas fireplace service technician.
The appliance should be inspected before use and at least annually by a professional. More
frequent cleaning may be required due to excessive lint from carpeting, bedding material,
etc. It is imperative that control compartments, burners and circulating air passageways of
the fireplace are kept clean.
NOTICE
IMPORTANT MESSAGE: SAVE THESE INSTRUCTIONS
The
RP-Series
Power Vent fireplaces must be installed in
accordance with these Instructions. Carefully read all the
instructions in this manual first. Consult the Local Gas Branch to
determine the need for a permit prior to starting the installation.
It is the responsibility of the installer to ensure this fireplace is
installed in compliance with the manufacturers instructions and
all applicable codes.
BEFORE YOU START:
Due to high operating temperatures, this appliance should be located out of traffic &
away from furniture and draperies.
Children and adults should be alerted to the hazards of the high surface temperature,
which could cause burns or clothing ignition.
Young children should be carefully supervised when they are in the same room as the
appliance.
Clothing or other flammable materials should not be placed on or near the appliance.
CAUTION
Contents of the Crate:
•
RP424PFC Fireplace
•
Control Box
•
Chosen Burner Media
•
Glass Crate
•
Glass Removal Tool
•
Rear Vent Conversion Tube (located inside the control
box)
•
Installation & Maintenance Manual
R
P
424P
F
C
_l
bl
1209-
v
1.
0
O
C
T
.21.
.2015
T
ek
ly
nx
Label
V
iew
D
em
o
Rating Plate Locations:
•
Inside the control box
•
Under the burner
•
On the rear of the appliance
