3.4.7 DELETE A SCENE IN A CHASE
1. Press and hold the PROGRAM button to enter Programming mode.
2. Press the desired CHASE button that contains the scene to be deleted.
3. Press the TAP/DISPLAY button to switch the LCD display to steps.
4. Use the BANK UP and BANK DOWN buttons to select the scene/step to be
deleted.
5. Press AUTO/DEL button to delete the step/scene. All LEDs will blink to confirm.
3.4.8 DELETE A CHASE
1. Press and hold the PROGRAM button to enter Programming mode.
2. Press the CHASE button to be deleted.
3. Simultaneously press the AUTO/DEL button and the CHASE button from the
previous step to delete the chase. All LEDs will blink to confirm.
3.4.9 DELETE ALL CHASE PROGRAMS
WARNING! This procedure will result in the irrevocable loss of all chase step
memory. However, the individual scenes and program banks will be preserved.
1
6
1. Turn the controller OFF.
2. Simultaneously press and hold the BANK DOWN and the AUTO/DEL buttons.
While holding these buttons down, turn the controller ON.
3. All LEDs will blink to confirm.
3.5 Scene Programming (Steps)
3.5.1 INSERT A SCENE
1. Press and hold the PROGRAM button to enter Programming mode.
2. Press the desired CHASE button.
3. Press the TAP/DISPLAY button to switch the LCD display to steps view.
4. Use the BANK UP and BANK DOWN buttons to navigate steps and locate the
insert point of the new scene. The display will show the step number after
which the scene will be inserted.
Example: If inserting a scene between Steps 5 and 6, the display should show
STEP05.
5. Press the MIDI/REC button to prepare the insert.
6. Use the BANK UP and BANK DOWN buttons to locate the Scene.
7. Press the SCENE button that corresponds to the scene to be inserted.
8. Press the MIDI/REC button to insert the scene. All LEDs will blink to confirm.
Summary of Contents for 612120
Page 1: ......