3.7 MIDI Input Operation
The controller will only respond to MIDI commands on the MIDI channel to which
it is set. All MIDI control is performed using "Note On" commands. All other MIDI
instructions are ignored. To stop a chase, send the BLACKOUT note (MIDI Note
126, see table below).
1. Press and hold the MIDI/REC button for about 3 seconds.
2. Use the BANK UP and BANK DOWN buttons to select the MIDI control channel
(1-16).
Note: This is the Channel on which the controller will receive MIDI
"Note On" commands.
3. Press and hold the MIDI/REC button for 3 seconds to save the settings.
4. To release MIDI control, repeat the above process, but press any other button
except the BANK buttons in Step 2.
MIDI Note
Function
MIDI Note
Function
00 to 07
Scenes 1-8 in BANK 1
88 to 95
Scenes 1-8 in BANK 12
08 to 15
Scenes 1-8 in BANK 2
95 to 103
Scenes 1-8 in BANK 13
16 to 23
Scenes 1-8 in BANK 3
104 to 111
Scenes 1-8 in BANK 14
24 to 31
Scenes 1-8 in BANK 4
112 to 119
Scenes 1-8 in BANK 15
32 to 39
Scenes 1-8 in BANK 5
120
Chase 1
40 to 47
Scenes 1-8 in BANK 6
121
Chase 2
48 to 55
Scenes 1-8 in BANK 7
122
Chase 3
56 to 63
Scenes 1-8 in BANK 8
123
Chase 4
64 to 71
Scenes 1-8 in BANK 9
124
Chase 5
72 to 79
Scenes 1-8 in BANK 10
125
Chase 6
80 to 87
Scenes 1-8 in BANK 11
126
BLACKOUT
3.8 Data Transfer
It is possible to transfer the programs stored in one Monoprice 612120 DMX
Controller to another by performing the following steps:
1. Use a DMX cable to connect the output of the source controller to the input of
the
destination controller.
2. Turn the source controller OFF. Press and hold down the SCANNER 2,
SCANNER 3, and SCENE 1 buttons. While holding down the buttons,
turn
the
controller ON. The LCD display will show TRANSMIT, indicating that it is ready
to transmit data.
19
3. Turn the destination controller OFF. Press and hold down the SCANNER 8,
SCANNER 9, and SCENE 2 buttons. While holding down the buttons, turn the
controller ON. The LCD display will show RECEIVE, indicating that it is ready to
receive data.
4. Both units are now ready to transmit and receive. Simultaneously press the
SCENE 7 and SCENE 8 buttons on the source controller to begin the transmission.
Summary of Contents for 612120
Page 1: ......