background image

1 INTRODUCTION 

1.1 Package Contents 

Please take an inventory of the package contents to ensure you have all the items 
listed below. If anything is missing or damaged, please contact Monoprice Customer 
Service for a replacement. 

1x 16-Channel DMX-512 Controller 
1x AC Power Adapter (DC 9-12V 500mA, 90V~240V) 
1x User's Manual 

1.2 Features 

Universal DMX-512 controller

Controls 12 intelligent lights of up to 16 channels

30 banks of 8 scenes, 240 scenes total

6 sets of chases containing 240 scenes

Execute multiple chases simultaneously

Re-assignable channels

Wheel assignable Pan/Tilt and 16-bit control

Beat-activation, tap sync, auto run

Grab any fixture on the fly

Polarity selector

MIDI compatible

1.3 Safety Guidelines 

Please read these instructions carefully, with extra attention to the following Safety 
Guidelines. Keep these instructions handy for future reference. 

This product is intended for indoor use only!

Do not expose this device to water or moisture of any kind. Do not place
items with water or moisture on or near this device.

Ensure that there is sufficient ventilation to allow the unit to cool. Do not block
any ventilation vents or slots and ensure that there are no flammable
materials or adjacent surfaces within 20 inches of this device.

Ensure that the power outlet use to connect this device does not exceed the
rated maximum voltage, listed on the back panel of the device.

Do not allow the power cord to be crimped, pinched, stepped on, etc. Ensure
that the power cord does not present a tripping hazard.

Never unplug the unit by pulling on the power cord. Always grasp the
connector head.

Ensure that power is turned off and disconnected before making any electrical
connections.

Unplug the unit from the wall when it will go unused for a lengthy period of

 time.

exceeds 113°F (45°C).

2

Summary of Contents for 612120























Reviews: