3.3.3 RUNNING A PROGRAM
1. Use BANK UP and BANK DOWN buttons to change Program banks, as
necessary.
Note: If the Blackout LED is illuminated, press the BLACKOUT button to
deselect it.
2. Press the AUTO/DEL button repeatedly until the AUTO LED turns on.
3. Adjust the Program speed via the SPEED fader and the loop rate via the FADE
TIME fader.
4. Alternatively, you can tap the TAP/DISPLAY button twice. The time between
the
two taps will become the time between SCENES (up to 10 minutes).
This is also called "Tap-Sync".
3.3.4 CHECK PROGRAM
13
1. Press and hold the PROGRAM button until the LED blinks.
2. Use the BANK UP and BANK DOWN buttons to select the Program bank to
review.
3. Press the SCENES buttons to individually review each scene.
3.3.5 EDITING A PROGRAM
Scenes will need to be modified manually.
1. Press and hold the PROGRAM button until the LED blinks.
Note: If the Blackout LED is illuminated, press the BLACKOUT button to deselect it.
2. Use the BANK UP and BANK DOWN buttons to change Program banks if
necessary.
3. Use the SCANNERS buttons to select the desired fixture.
4. Adjust and change fixture attributes using the channel faders and wheels.
5. Press the MIDI/REC button to prepare the save.
6. Select the desired SCENES button to save.
3.3.6 COPY A PROGRAM
1. Press and hold the PROGRAM button until the LED blinks.
2. Use the BANK UP and BANK DOWN buttons to select the Program bank you
will copy.
Note that the all scenes in the Program bank (up to 8) will be copied.
3. Press the MIDI/REC button to prepare the copy.
4. Use the BANK UP and BANK DOWN buttons to select the destination Program
bank.
5. Press the MUSIC BANK COPY button to execute the copy. All LEDs on th
e controller
will blink to confirm.
Summary of Contents for 612120
Page 1: ......
