3.2 Operation
3.2.1 MANUAL MODE
Manual mode allows direct control of all scanners. You are able to move them and
change attributes by using the channel faders and wheel. Note that all changes
made while in Manual made are temporary and will not be recorded.
1. Press the AUTO/DEL button repeatedly until the MANUAL LED illuminates.
2. Press a SCANNER button to select that Scanner.
3. Move the wheel and faders to manually change fixture attributes.
4. Use the PAGE SELECT button to switch between fader control of Channels 1-8
and fader control of Channels 9-16.
5. Press the TAP/DISPLAY button to toggle the LCD display between DMX values
(0-255) and percentages (0-100).
3.2.2 REVIEW SCENE OR CHASE
This instruction assumes that you have already recorded Scenes and Chases on
the controller. Otherwise, skip this section and go to section 3.3 Programming.
1. If the controller is not in Manual mode, enable Manual mode by following the
instruction in section 3.2.1.
2. Use the BANK UP and BANK DOWN buttons to select one of the 30 Banks.
3. Select a SCENE button corresponding to the Scene you want to review.
11
4. Move the wheels and faders to change fixture attributes.
3.2.3 REVIEW SCENE OR CHASE
This instruction assumes that you have already recorded Scenes and Chases on
the controller. Otherwise, skip this section and go to Programming.
1. If the controller is not in Manual mode, enable Manual mode by following the
instruction in section 3.2.1.
2. Press one of the six CHASE buttons.
3. Press the TAP/DISPLAY button to view the step number on the display.
4. Press the BANK UP and BANK DOWN buttons to review all scenes in the
Chase.
Summary of Contents for 612120
Page 1: ......
