16. MIDI/REC BUTTON
Activates MIDI external control and is used to confirm the record/save process.
17. ASSIGN LED
During initial setup, indicates that the controller is in Channel assign mode.
18. AUTO/DEL BUTTON
During programming, pressing this button deletes the current function.
Otherwise, pressing this button activates Auto mode.
19. CHASE BUTTONS
These buttons allow direct access to Chase Memories 1 - 6.
20. SPEED FADER
This slider adjusts the hold or wait time of a scene or a step within a chase.
21. FADE TIME FADER
Also considered a cross-fader, this slider sets the time interval between two
scenes in a chase.
22. FINE BUTTON
Activates 16-bit control of the wheel, resulting in movement being in extremely
small increments. Additionally, while the FINE button is active, the Bank
UP/DOWN buttons will increase and decrease the DMX values by one for either
the wheel or the slider in focus or currently being moved.
23. REVERSE LED
Indicates that Reverse mode is active.
24. PAN/TILT WHEELS
Used to control the pan and tilt movements of a fixture.
25. MODE BUTTON
This multifunction button is used for assigning pan/tilt wheels and channels.
26. OVERRIDE BUTTON
Used to override the fixture settings.
27. FOG MACHINE BUTTON
Pressing this button activates the connected fog machine.
28. FOG MACHINE READY INDICATOR
Indicates that the connected fog machine is heated up and ready to disperse
fog/mist.
29. FOG MACHINE HEATING INDICATOR
Indicates that the fog machine is heating up.
6
Summary of Contents for 612120
Page 1: ......
