2. Simultaneously press the FINE and MODE buttons, release them, then press
them again a second time to access the Channel Assignment mode. The
Assign LED will illuminate in response. The wheel can be reassigned to output
on a different DMX channel.
Note: Simultaneously press the
AUTO/DEL
and
MODE
buttons to delete the
channel assignment mode.
3. Press a SCANNER button that represents the fixture for which you would like to
set the pan & tilt.
4. Use the BANK UP and BANK DOWN buttons to select pan/tilt.
5. Press the TAP/DISPLAY button to switch pages.
Note: You can reassign the DMX channel to all controller fader channels.
6. Press and hold the MODE button, then press the SCENES buttons to select the
DMX channel. All LEDs will blink.
7. Press and hold the FINE & MODE buttons to exit.
3.1.4 REVERSE REVIEW
1. Simultaneously press the FINE and MODE buttons to access wheel assignment
mode
2. Press a SCANNER button to select a scanner.
3. Simultaneously press the FINE and MODE buttons, release them, then press
them again a second time to exit
3.1.5. WHEEL ASSIGNMENT REVIEW
1. Simultaneously press the FINE and MODE buttons, release them, then press
them again a second time to access the Channel Reverse mode.
2. Press a SCANNER button to select a scanner.
3. Simultaneously press the FINE and MODE buttons to exit.
3.1.3 WHEEL ASSIGNMENT
Because not all intelligent lighting fixtures are alike or share the same control
attributes, the Monoprice
612120
DMX Controller allows you to assign to the
wheel the correct pan and tilt channel for every individual fixture, including
1
6-bit
channel assignments.
It also allows you to reassign physical faders to fixture DMX
channels so that you can combine or unify control of similar or the same attributes
across different types of fixtures.
All wheels can be reassigned to output on a different DMX channel.
Press and hold the PROGRAM button until the LED blinks.
1
.
9
Summary of Contents for 612120
Page 1: ......
