14
3.4 Chase Programming
A chase is created by using previously created scenes. Scenes become steps in a
chase and can be arranged in any order you choose. It is highly recommended that,
prior to programming chases for the first time; you delete all chases from memory.
See 3.4.9 Delete All Chase Programs for instructions.
3.4.1 CREATE A CHASE
A Chase can contain up to 240 scenes as steps. The term steps and scenes are
used interchangeably.
1. Press the PROGRAM button until the LED blinks.
2. Press the CHASE button you wish to program.
3. Change the BANK as necessary to locate a Scene.
4. Select the SCENE to insert.
5. Tap the MIDI/REC button to store the Scene.
6. Repeat steps 3 through 5 to add additional steps in the Chase. Up to 240 steps
can be recorded.
7. Press and hold the PROGRAM button to save the Chase.
3.4.2 RUNNING A CHASE
1. Press a CHASE button then press the AUTO/DEL button.
2. Adjust the Chase speed by tapping the TAP/DISPLAY button, waiting the
desired delay period, then tapping the TAP/DISPLAY button again a second
time. The time interval between the two taps will become the Chase Speed (up
to 10 minutes).
3.4.3 CHECKING A CHASE
1. Press and hold the PROGRAM button until the LED illuminates.
2. Select the desired CHASE button.
3. Press the TAP/DISPLAY button to switch the LCD display to steps.
4. Review each scene/step individually by using the BANK UP and BANK DOWN
buttons.
Summary of Contents for 612120
Page 1: ......