Monet DESAUW FWA500, Manual

Page: 10 / 85

ALWAYS WORK SAFELY
Read the following safety instructions carefully and follow the recommendations in order
to avoid potential hazards and safeguard your health and safety.
In the text of this manual you will find the symbol alongside the following key words:
CAUTION – When the warning is to prevent potential damage to the machine, which
could also put the operator’s safety at risk.
DANGER – This warning specifically indicates a potential danger to the user or to any
other person directly involved.
Failure to observe the instructions preceded by the aforementioned key words
(
CAUTION and DANGER ) may result in severe or fatal injury to the persons involved.
Furthermore, this manual also contains instructions in italics preceded by the terms
NOTE and WARNING , with the following relevance in relation to machine protection:
NOTE – Underlines the correct procedures or technique to be followed by the operator.
WARNING – Informs the operator of the danger of damaging the machine if the
specified procedure is not followed.
IMPORTANT WARNINGS
The machine is designed and produced exclusively for cutting truss components.
All other use will be considered to be contrary to the use specified by MONET
DESAUW, who cannot be held liable for damage to property or the machine, or for
personal injuries which may result.
Persons who risk improper use will therefore assume the responsibility for any
consequences arising from such use.
Compliance with the instructions for use, maintenance and repairs described in this
manual, are the essential preconditions for the use specified by MONET DESAUW.
The machine must only be used, serviced or repaired by personnel trained in the relevant
working methods and safety regulations and who have been authorized to work on the
machine.
Under no circumstances will a guarantee be issued for products made or sold by MONET
DESAUW that are damaged as a result of the malfunction of parts and/or components not
approved by MONET DESAUW.
GENERAL WARNINGS
During the manufacturing of this saw, every step has been taken to ensure safe operation.
However, the best way to avoid accidents is to exercise caution at all times.
6