Monet DESAUW FWA500, Manual

Page: 21 / 85

Pre-Start
Checklist
In order to ensure the safety of the operator and operation of the saw, it is necessary to
proceed through the following pre-check inspection procedure.
1.
Make sure the safety disconnects on the fixed end is in the “Off”
position. Lockout procedures are to be followed as prescribed by standard
lockout procedures or rules.
2.
Make sure all safety equipment is securely in place, working
mechanically and activated.
A. Emergency Stop Buttons
B. Emergency Pull Cable (rear side)
C. Bump Bar (right front)
D. Cutoff Guards
3.
Thoroughly check for loose or missing bolts, set screws or parts.
A: Check each quadrant
1. Motor hub and blade bolts
2. Motor mounting bolts
3. Fan cover end/coder mounts
B: Check Bolts
1. Hold down spring pins
17