Mondolfo Ferro Startline S 421, Operator'S Manual

Page: 129 / 402

Startline S 424-S 421-S 521-S 524
Operator manual 129
UK
This operating phase may involve noise levels of 85 dB (A).
It is therefore suggested that ear protectors be worn.
It is suggested to wear eye protection to prevent injury due to contact
with dusts or any fragments inserted into the tyre.
A bursting tyre can cause projections of its parts in surrounding areas with a force
sufficient to cause serious injury or death.
Do not mount a tyre if its dimensions (indicated on the side) do not correspond
exactly to the rim dimensions (printed inside the rim) or if the rim or the tyre is
defective or damaged.
Never exceed the pressure recommended by the tyre manufacturer.
The tyre changer is not a safety device and does not prevent tyres and rims from
exploding. Keep all persons not working on the machine out of the working area.
9.8.b. TYRE INFLATION
-Make sure the wheel is NOT
clamped on the turntable by the
centring jaws (Fig. 30).
- Move the horizontal arm to the
wheel centre (all slipped off towards
the operator)
- Lower the vertical arm until it
touches the rim (fig.31), then clamp the arm in this
position.
- Remove the valve core
if it has not already been
removed (Fig. 32).
- Connect the Doyfe
connector of the inflating
hose to the valve stem
(Fig. 33).
DANGER
WARNING
NO
YES
30
31 32