Mondolfo Ferro Startline S 421, Operator'S Manual

Page: 127 / 402

Startline S 424-S 421-S 521-S 524
Operator manual 127
UK
- Once you have mounted the first bead,
repeat the same steps for the second bead
(fig.29).
- Move the operating arms to the “non-
working” position.
- release the wheel and remove it from the
tyre changer.
Special tools
To make it easier to mount/demount low
profile tyres, it is advised to use the
bead
presser gripper (optional accessory supplied
on request).
9.7 APPROVED UHP AND RUN FLAT TYRE DEMOUNTING AND
MOUNTING PROCEDURE
For a detailed description of the UHP and RUN FLAT tyre demounting/mounting procedure,
please refer to the instructions in the manual developed by WDK (German Tyre Industry
Association).
9.8. TYRE INFLATION
9.8.A. SAFETY INDICATIONS
• RISK OF EXPLOSION
• Never exceed tyre pressure recommended by
tyre manufacturer.
• Always match the tyre and rim dimensions.
• Take care to avoid any damage to the tyre.
• During inflation, keep outside the vertical
cylinder area occupied by the wheel.
DANGER
29