PRIME TR3000
33
ENGLISH
Step 3: Handlebar assembly
A.
Rotate the handlebars down so they are positioned on top of the handlebar posts. Secure the
right and left handlebars to the support post using the 2 M8x70L screws (B) provided in the
hardware bag.
B.
Rotate the console bracket (8) up in the back until it reaches its normal operating position. This
will cause the console support tube to rotate in the frame.
C.
Place the left outside handlebar cover (9) next to the inside handlbar cover (pre-attahced). Posi
tion the (pre-attached blue rubber ring (X) to fit between these handlebar covers allowing the
plastic ridge to sit in the groove of the blue rubber ring. Secure these three parts together using
the self-tapping screws (C), which are pre-installed in the outer cover. Repeat this process on the
other side with the right outside handlebar cover (10).
Note: Make sure that the wires on both sides are not pin-
ched in-between the handlebars and the handlebar post.
Blue rubber ring
