Monaco Executive 2001, Owner'S Manual

Page: 238 / 269

Chassis Information
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
E X E C U T I V E
7 • 2 3 8
the vehicle. This is machined into the axle when manufactured and is not
adjustable.
• “Positive” camber is an outward tilt of the wheel at the top.
• “Negative” camber is an inward tilt of the wheel at the top.
Nominal Camber Values-Degrees
• Left .15 degree tolerance .50 degree
• Right .15 degree tolerance .50 degree
Toe Setting
The toe setting represents different distances between the front and
rear of the tires (measured at the vertical centerline of the tires).
Toe-in occurs when the tire front distance is less than the tire rear
distance.
Toe-out occurs when the tire front distance is greater than the tire
rear distance.
Wheels are generally set with initial toe-in. As the vehicle operates,
tires tend toward a toe-out condition. By starting with an initial toe-in
setting, a desirable “near zero toe-in” can be achieved when the vehi-
cle is in motion.
Incorrect toe settings, where toed-in or toed-out, can have a signifi-
cant effect on tire wear. The toe setting is adjusted by lengthening or
shortening the cross tube.
The toe setting is .03 degree.
WHEEL ALIGNMENT