5.2 Default Settings
Me controllers leave the factory with their default settings as shown below:
Table 5-1 Default Controller Settings
Boost Level
0ºC or 0ºF
Over / Under Temperature Range
10ºC or 18ºF
Maximum Power
85%
Standby Level
65ºC or 118ºF
Zone Temperature
0ºC or 0ºF
5.3
Configure the Controller
The following options apply universally for every tool.
NOTE
The tool settings may be different for different tools. For example, Tool 1
may display temperatures in °C and Tool 2 may display temperatures in °F.
1. Choose [
Tool]
to open the ToolStore page.
2. Choose [
Setup
] to open the Setup Tool page.
If prompted, enter the System password.
3. Choose [
Config
] to display the configuration options.
5-2
© 2020 Mold-Masters (2007) Limited. All Rights Reserved.
SETUP
Me6 & Me12 Controller User Manual