4. Choose [
Options
] to open the Zone Settings pages.
Settings on these pages include:
• Alias
– uses the selected a title to identify a group of zones as either
Probes, Manifolds or Sprues. “Not Used” allows you to switch off
spare zones so they do not show on the main page.
• Speed
– zones can be set to Auto-detect, Fast, Medium, or Slow.
• Sensor
– allows you to match the controller to either a J-type or
K-type thermocouple.
5. Choose an option.
The option button will turn blue.
6. Choose [
Enter
] to confirm the selection or [
Back
] to leave the page
without making any changes.
5-7
© 2020 Mold-Masters (2007) Limited. All Rights Reserved.
SETUP
Me6 & Me12 Controller User Manual
