5.9 Set Standby Value
The Standby amount must be configured before this feature can be used.
The Standby settings made here are only for Standby temperature and are
individually set for each zone. When Standby is activated, those zones with
any Standby value configured will reduce their temperature.
1. Choose [
Tool
] to open the ToolStore page.
2. Choose [
Setup
] to open the Setup Tool page.
If prompted, enter the System password.
3. Choose one or more zones, using one of the following methods.
• Choose one zone at a time until you have selected all the required
zones.
•
Choose the first zone, the last zone, and [
Range
] to include all the
zones in between.Choose [
Set
] to show the Zone setting options
4. Choose [
Standby
] to open the Standby panel.
5. Choose [
Edit
] from the Standby panel to show the keypad.
5-14
© 2020 Mold-Masters (2007) Limited. All Rights Reserved.
SETUP
Me6 & Me12 Controller User Manual
