6.17 The ToolStore Page
The initial page shows the 4 tool slots that can be used to save different
settings for different tools.
The tool that is currently loaded and being used is highlighted in pink:
Other tool slots that have saved tool settings can be identified by the names
within their boxes.
6.18 Choose a Tool
1. Choose a tool slot.
The border of the box turns to blue to indicate that it has been chosen.
2. Choose [
Load
].
Choose [
OK
] to confirm use of this tool.
3. Choose [
Back]
to return to the previous page.
4. Choose [
Setup
].
Enter the System password.
The Tool Setup page offers more control of the setup of the tool. See
6-15
© 2020 Mold-Masters (2007) Limited. All Rights Reserved.
OPERATION
Me6 & Me12 Controller User Manual