6.14 Status Window
The right Status window shows NORMAL if all the zones are at their set
temperature and no faults have been detected. If any zone detects a fault
then the Status window changes its display and color as detailed below:
Table 6-3 Status Window
Display
Color
Description
NORMAL
Green text
on black
Controller is running normally.
WARNING
Black text
on yellow
A zone’s temperature exceeds the warning
limits.
ALARM
White text
on red
This shows either a fatal error or that a zone’s
temperature exceeds alarm limits.
NOTE
The Status Alarm is only active when in RUN mode in order to prevent
slower systems from raising unnecessary alarms.
Once at their set temperature, systems switch to RUN mode and the alarm
becomes active.
6-13
© 2020 Mold-Masters (2007) Limited. All Rights Reserved.
OPERATION
Me6 & Me12 Controller User Manual
