The purpose of this manual is to assist users in the integration, operation
and maintenance of the M1 Plus controller. This manual is designed to cover
most system configurations. If you need additional information specific to your
system please contact your representative or a
Mold-Masters
office whose
location can be found in the “Global Support” section.
1.1 Intended Use
The M1 Plus Series controller together with the MTS console is an electrical
distribution and control device designed as a multi-channel temperature
controller for use in hot runner plastic molding equipment. It uses feedback
from thermocouples within the nozzles and manifolds to give precise
closed-loop temperature control, and it is designed to be safe during
normal operation. Any other uses would fall outside the engineered intent
of this machine which may be a safety hazard and would void any and all
warranties.
This manual is written for use by skilled persons who are familiar with
injection molding machinery and their terminology. Operators should be
familiar with plastic injection molding machines and the controls of such
equipment. Maintenance persons should have sufficient understanding of
electrical safety to appreciate the dangers of 3-phase supplies. They should
know how to take appropriate measures to avoid any danger from electrical
supplies.
1.2 Release Details
Table 1-1 Release Details
Document Number
Release Date
Version
M1P-UM-EN-00-05-10
July 2019
5-10
M1P-UM-EN-00-06
January 2021
6
1.3 Warranty Details
For current warranty information please refer to the documents available from
our website:
https://www.moldmasters.com/support/warranty
or contact your
Mold-Masters
representative.
1.4 Returned Goods Policy
Please do not return any parts to
Mold-Masters
without pre-authorization and
a return authorization number supplied by
Mold-Masters.
Our policy is one of continuous improvement and we reserve the right to alter
product specifications at any time without giving notice.
1.5 Movement or Resale of Mold-Masters
Products or Systems
This documentation is intended for use in the country of destination for which
the product or system was purchased.
Mold-Masters
takes no responsibility for documentation of products or
systems if they are relocated or resold outside the intended country of
destination, as stated on the accompanying invoice and/or waybill.
Section 1 - Introduction
1-1
INTRODUCTION
© 2021 Mold-Masters (2007) Limited. All Rights Reserved.
M1 Plus Controller User Manual
