6.17 Load Tool Settings Locally
NOTE
If the controller is in RUN mode and another tool setting with a different
temperature is selected and loaded, then the tool will immediately change
to run at the new incoming temperature setting.
1. Choose the required tool.
2. Choose [
Load
].
• If the [
Load
] button is greyed out then the option to be able to change
tools while in Run mode has been disabled. See Allow ToolLoad in
“Table 5-5 Utilities Parameters” on page 5-17.
3. Choose [
OK
] to save or [
Cancel
] to exit.
6-22
M1 Plus Controller User Manual
OPERATION
© 2021 Mold-Masters (2007) Limited. All Rights Reserved.
