
72
Appendix D. Command language
scal
set,scal,double0,double1,double2,double3
Calibration coefficients used for device-based measurement. Each coeffi-
cient is a double-precision real number.
grating
set,grating,double
Defines grating frequency (per mm), at calibration temperature.
tco
set,tco,double
Grating temperature coefficient.
ctemp
set,ctemp,double
Device temperature (in
◦
C) at time of calibration.
cpressure
set,cpress,double
Barometric pressure (in hPa) at time of calibration.
focal
set,foc,double
Focal length of lens.
rgb
set,rgb,r,g,b
Set backlight intensity. Three unsigned integers should be provided, but
most devices have one colour (white) backlights and their intensity is de-
fined by the
r
value.
3
≤
r, g, b
≤
254.
contrast
set,contrast,int
Set
LCD
contrast; unsigned integer between 0 and 64. Values between 8
and 20 work well. Best value depends on viewing angle.
userid
set,userid,str
Defines the user ID for firmware upload. Default value is “moglabs”. When
uploading new firmware, you will be asked for a user ID and password.
This command allows you to set the user ID to limit access to firmware
changes.
password
set,pass,str
Defines the password for firmware upload.
Summary of Contents for MWM
