
2.4 Device menus
9
2.4.6
Ethernet
The ethernet sub-menu shows the current
IP
address, and stored (static
default) values for static
IP
address, netmask, gateway
DHCP
and
TCP/IP
port.
To save and activate the new values, move down the menu to either
Save
to eeprom
or
Save and restart
and press
OK
. Both
Save
options copy the
new values to
EEPROM
. The
Save and restart
option will also reboot the
device with the new values.
2.4.7
Other
Row is the sensor row used for measuring wavelength. The maximum expo-
sure time (in milliseconds), pressure measurement correction, and screen
contrast can also be changed. Note that there is no value range checking;
consult the command language in appendix D for more information. Alter
values as above.
2.4.8
System voltages
On-board power supply voltages, for debugging technical problems in con-
sultation with
MOGL
abs.
Summary of Contents for MWM
