
14
Chapter 3. Web interface
3.3
Live+
Live+ shows just the real-time value of the wavelength, in the largest font
that will allow the number to fit within the current window. Change the
browser window size to enlarge or reduce the display. Use your browser
back-button to return to the previous web page.
Figure 3.3:
Live view, showing the wavelength in real time.
3.4
Device setup
The device setup page can be accessed from the menu bar (
Functions,
Setup
) or by clicking on the
Device setup
button on the home page. The
lower section of the screen shows the temperature, pressure and power
supply voltages for diagnostics and fault-finding, but the main purpose of
the page is for displaying and altering key device parameters.
3.4.1
Configuration
Units
Drop-down list of measurement units including
nm (raw)
,
nm (vac)
,
nm
(air)
,
THz
,
cm-1
and
col
; see
units
in appendix D for details.
Row
The imaging sensor row used for acquisition of spectra. The default row
will be set when the device is calibrated, or using
mogwave
.
Max exposure
The maximum exposure time that will be allowed when automatic
exposure control is used. Exposure times up to ten seconds (10,000 ms)
can be used for measuring the wavelength of extremely weak lasers, but for
Summary of Contents for MWM
