
4. MOGWAVE
The host software
mogwave
provides a graphical user interface that allows
measurement and calibration functions. See appendix E for information on
starting
mogwave
and configuring default parameters.
4.1
Device discovery
By default, a device discoverer (Figure 4.1) is initiated when
mogwave
is
started. The discoverer scans the USB ports of the host computer looking
for an
MWM
device, and then scans the local network subnet. Starting the
application is then as simple as selecting the device to communicate with
and clicking
Connect
.
Figure 4.1:
Example of the
device discoverer
window.
If the network does not permit device discovery and/or your
MWM
does not
appear in the list, it is possible to enter the IP address of the unit in the
Device address
box and connect regardless.
The discoverer will not start if the connection is specified in the default
configuration file or on the command line or equivalent shortcut link (see
appendix E).
If using
USB
, or you have multiple
MWM
devices, or the network is a little
17
Summary of Contents for MWM
