77
Manual and Automatic Operation – Overview
•
Network with fixed IP addresses
In order to access the camera, it must have an IP address within the range of the local
network. To set the camera’s network parameters, you can use one of these methods:
– Manually using a browser:
First, you need to change the network parameters of your computer (see Section 3.2.1,
«Manually Setting Up the Network Parameters in a Browser» and following …).
– Integration into MxManagementCenter with automatic adjustment of the camera’s
IP address:
The camera is displayed in MxManagementCenter despite the fact that the IP address
is not part of the local network. The application allows reconfiguring the network
parameters accordingly (see Section 3.2.3, «First Images and Network Parameter
Configuration in MxMC»).
3.
Configure the camera.
Using the web-based user interface or MxManagementCenter.
Camera software
in the browser
Summary of Contents for AllroundDual M16B
