Mobotix AllroundDual M16B, Manual

Page: 52 / 124

52
M16 Camera Manual: Installation
2.2.6 Connecting a USB Cable
Using the USB plug (red circle in figure), you can attach existing expansion modules, such
as the MOBOTIX ExtIO (USB), the MX-232-IO-Box or external USB hard drives to the camera
in a weatherproof and well-protected manner.
Procedure
1. Open camera housing: Open the camera housing
as described in Section 2.2.2.
2. Remove the single wire plug: Remove the blue single
wire plug (red circle in figure).
3.
Guide the USB cable through the housing: Guide
the cable from the front through the cable guide in
the hinge of the VarioFlex mount (see figure).
4. Connect the USB cable: Insert the MiniUSB plug into
the appropriate connector. Apply bayonet catch as
shown and turn it clockwise until it gently snaps shut.
5.
Close camera housing: Close the camera housing
as described in Section 2.2.8.
Only use USB cables with
angled plugs for connecting
USB cables to the M16!