Mobotix AllroundDual M16B, Manual

Page: 36 / 124

36
M16 Camera Manual: Installation
2 INSTALLATION
The MOBOTIX M16 has been designed to be mounted on walls and ceilings. It can also be
installed on a mounting pole using the appropriate MOBOTIX accessories. The different
installation options are described in Section 2.3, «Mounting the Camera with Wall Mount» and
the following sections, while the drilling templates are available on
www.mobotix.com
>
Download Center > Documentation > Manuals .
2.1 Preparing the Installation
Before installing the MOBOTIX M16, the following questions should be answered:
1. Where will the camera be installed?
2. What other additional installation options are available?
3. How is the camera connected to the network and how is the power supplied?
4. How are the connections furnished from the building?
5. What cabling considerations are necessary?
The following sections in this chapter should answer all these questions. If anything is unclear
or you have more questions, please contact your MOBOTIX partner or MOBOTIX Support
directly. Contact information can be found at
www.mobotix.com
under Support .
2.1.1 Installation Options: Wall, Ceiling, Pole
Like all MOBOTIX cameras, the M16 is extremely flexible in terms of how and where it can be
installed. An M16 can be used for both indoor and outdoor applications: in fixed or mobile
applications – constantly changing locations or in/on vehicles of any kind. The M16 cameras
have been certified
weatherproof according to IP66 IP66 and can work reliably in temperature
ranges from –40 to 60 °C/–40 to 140 °F (cold start min. temp. –30 °C/–22 °F) without heating or
fan. A practical weather and sun protective cover is integrated into the extremely resistant
housing, which is made of UV-resistant special-purpose plastic.
Thanks to the camera’s unique VarioFlex mounting system (supplied as standard), the M16
camera can be installed quickly and easily on any wall, ceiling or even a round pole of up
to 18 cm in diameter (when combined with the stainless steel pole mount). The VarioFlex
mounting system allows a wide range in both the horizontal and vertical directions (rotating
and tilting) to enable precise adjustment to suit the area to be monitored.
The mount also
fits directly over in-wall sockets (without the frame) and MOBOTIX interface boxes to fully
conceal the cable, thus improving the security of the installation.
Signal input/output
RS232
GPS time and posi-
tion information
Ext. power supply
(e.g., solar panel)
Overvoltage protection
+ network connector