Mobotix AllroundDual M16B, Manual

Page: 7 / 124

7
SAFETY WARNINGS
Notes on Installing:
• This product must not be used in locations exposed to the dangers of explosion.
• Make sure that you install this product as outlined in Chapter 2, «Installation» of this
manual. A faulty installation can damage the camera!
• When installing this product, make sure that you are only using genuine MOBOTIX
parts and MOBOTIX connection cables.
• Only install this product on suitable, solid materials that provide for a sturdy installa-
tion of the fixing elements used.
Electrical installation: Electrical systems and equipment may only be installed, modified
and maintained by a qualified electrician or under the direction and supervision of a qual-
ified electrician in accordance with the applicable electrical guidelines. Make sure to prop-
erly set up all electrical connections.
Electrical surges: MOBOTIX cameras are protected against the effects of small electrical
surges by numerous measures. These measures, however, cannot prevent the camera from
being damaged when stronger electrical surges occur. Special care should be taken when
installing the camera outside of buildings to ensure proper protection against
lightning ,
since this also protects the building and the whole network infrastructure.
Max. power consumption of attached extension modules: The power consumption of all
attached MxBus modules must not exceed 3 W. When attaching modules to the MxBus
connector
and the USB socket, the power consumption of all attached modules must
not exceed 4 W, if the camera is powered by PoE class 3. If PoE class 2 is used, the cam-
era cannot power any peripheral devices!
Never touch the lenses: Due to the high performance of the M16, the area of the image
sensor can get quite hot , especially when the ambient temperature is also high. This does
not affect the proper functioning of the camera in any way. For this reason, the product must
not be installed within the reach of persons without domes or protective lens covers.
Power off before opening the camera: Make sure the power supply to the camera is discon-
nected before opening the camera housing (e.g., when inserting or exchanging lenses, lens
units and SD cards).
Network security: MOBOTIX products include all of the necessary configuration options for
operation in Ethernet networks in compliance with data protection laws. The operator is
responsible for the data protection concept across the entire system. The basic settings
required to prevent misuse can be configured in the software and are password-protected.
This prevents unauthorized parties from accessing these settings.