Operation
57
Fig.10-1: Screed floats
Filling in of material
starts.
Screed floats!
Fig.10-2: Screed has floated up
Screed has floated up
As soon as the screed has floated up, the layer thickness must be measured
manually!
Fig.10-3: Aligning the system
1)
Turn or press the handwheel (2) in the “Layer thickness” menu.
2)
An input field (1) will appear on the right side of the display.
3)
Set the measured layer thickness by turning the handwheel (2).
4)
Press the handwheel (4) and confirm the value.