54
Initial commissioning
Fig.9-13: Setting the “Basic screed width”
2)
Select the “Basic screed width” (C) menu item to be set by turning the
handwheel (2) and set the current value (0mm
–
9999 mm).
3)
Press the handwheel (2) and confirm the value.
4)
Select/activate the “Attachment elements” menu item (D/E) to be set by
turning/pressing the handwheel (2).
Fig.9-14: Setting the attachment elements
Adjusting the width is generally done in 0.1 steps. Upon activating the
“Addition factor 10” function, the value is always increased by 10 cm.
5)
Activate the “Addition factor 10” function, by pressing the (3) button
(menu item is highlighted in yellow when in active state).
6)
Set the width by turning the handwheel (4).
7)
Press the handwheel (4) and confirm the value.