Mounting
41
8.1.7 Mounting the IR temperature sensor
The IR temperature sensors are used to selectively monitor material temperature.
This can be done at a suitable and easily accessible position on the material bucket
or on the paver auger. The infrared surface measurement works the most effectively
when measuring is done where material is constantly moving.
NOTE!
Positioning of the sensor!
The IR temperature sensor must be directly connected to the
MTSC-201. The connection cable must not be extended.
Fig.8-19: Preparing temperature sensor
1)
Loosen the pipe clamp (1) with the bolts (2), position the sensor according to
the figure and retighten the pipe clamp.