34
Mounting
8.1.3 Mounting the “Pave-TM” control box
The control box can be mounted on any readily accessible location on the machine.
NOTE!
Positioning of the control box!
The supply lines to individual system components must not be
squeezed or torn off by moving parts.
The control box is equipped with a universal “support rail” on the rear side. In this
way, it can be installed on all conventional machine types.
An example of mounting with the dedicated dovetail holder is described below.
Alternatively, mounting can also be done using pipe clamps or with industrial
magnets.
Mounting with dovetail holder
Fig.8-8: Mounting the control box
1)
Prepare the necessary fixing holes at the mounting position provided on the
paver (A).
2)
Mount the holding fixture (2) on the paver.
3)
Mount the control box (1) into the holding fixture (2).