32
Mounting
Both rear ultrasonic sensors must be mounted on the left and right of the screed via
a holder designed in line with the paver type or adapted to it. An example of
mounting is described below.
Fig.8-6: Ultrasonic sensor on screed
1)
Mount the holder (6) at the mounting position provided on the paver.
2)
Loosen the star knob screws (7).
3)
Insert the sensor (5) into the holding fixture in the installation position provided
(laterally to the direction of travel).
4)
Tighten the star knob screws (7).
Both front ultrasonic sensors must be mounted on the left and right of the tow arm
via a holder designed in line with the paver type or adapted to it. An example of
mounting is described below.