32
If you press the button NO, the edited program will be launched, but after you switch
off the Stainer, the changes will not be saved.
If the newly entered PIN was incorrect, after pressing the button START OF
PROCESS on the screen will be message:
<INCORRECT PIN IS ENTERED
ALL CHANGES MADE TO THE PROGRAM ARE CANCELED
TOUCH THE SCREEN TO RETURN TO THE MAIN MENU>
Before programming a new program, it is rational to define, which reagents will be
used, to count the number of technological operations, to think over how to arrange troughs
with reagents. To develop a new program, use the special form, the template for which is
given in
Appendix C
.
An editable file with template can be uploaded at the website
www.fastainer.com in the “support” section.
There is also an opportunity to write a new program with special personal computer
software «FASTAINER FIRMWARE EDITOR» (
Appendix F
).
5.3 Menu section «CONFIGURATION»: programming and control of the
configuration, performing of service functions
To access the menu section
«CONFIGURATION», press the button
CONFIGURATION
in the main menu.
Figure 20. Menu section
«CONFIGURATION»
.
The upper line indicates the application of the current screen: current menu section
<CONFIGURATION>, current program: <DEMO>, and the interval of the introduction of new
racks into the process in the format HH:MM:SS.