31
<INCORRECT PIN FORMAT
DEFAULT SETTED PIN IS 255
TOUCH THE SCREEN TO CONTINUE>
The Stainer allows you to wright and save up to 32 programs. All programs, including
the preprogrammed ones (factory programs), can be edited. An edited program can be
saved under a new name (as a new program), herewith a message will appear on the
screen:
<SAVE CHANGED PROGRAM
UNDER A NEW NAME?>
If you press the button YES, the edited program will be saved under a new name and
a new PIN. The saved program will be added to the section «TECHNIQUES». If you press
the button NO, it will be needed to enter the PIN, which was entered before in the course of
new program saving.
Figure 19. The PIN entering screen (saving changes in program under old name).
After PIN entering, press the button ENTER, and the Stainer will return to the main
menu.
CAUTION!
DO NOT ENTER INCORRECT PIN
If the newly entered PIN was correct, after pressing the button START OF PROCESS
on the screen will be message, offering to save the edited program under the previous name:
<PROGRAM WAS CHANGED
SAVE THE CHANGES?>
If you press the button YES, the edited program will be overwritten.