MK-370
Revision 06/05, Effective Date June 17, 2005
Page 22
SETUP, ADJUSTMENT and OPERATION
5. Cleanup:
NOTE:
Dispose of wastewater in accordance with applicable Federal, State and Local laws.
Ensure the saw is disconnected before completing the remainder of the cleanup process.
(B)
Remove the Cutting Assembly
from the Water Pan
(C)
Dispose the contents of the
Water Pan
(D)
Remove the pump Suction
Screen and clean the Water
Pump of all debris
(E)
Fill the Water Pan with clean
water
Fill with
clean water
Fill Water
Pan
(F)
Run the MK-370 until clear water
is seen at the blade cooling ports
(Approx. 1 minute)
(H)
Unplug the GFCI from the
Power source
Unplug
Empty
Water Pan
Removal
Direction
Suction
Screen
Off
Position
(A)
Ensure the ON/OFF Switch is
in the OFF position
ON/OFF
Switch
Remove
Cutting Table
Cooling Flow
Points
(J)
Turn the motor OFF when work
is complete
Off
Position
ON/OFF
Switch
(I)
Remove the Cutting Assembly
from the Water Pan
Remove
Cutting Table
