MK-370
Revision 06/05, Effective Date June 17, 2005
Page 11
UNPACKING, TRANSPORT, UNIVERSAL STAND and ASSEMBLY
UNPACKING:
Your MK-370 has been shipped from the factory thoroughly inspected. Only minimal assembly is required.
Use proper lifting techniques when lifting the MK-370.
If not done, remove the MK-370, Cutting Head and accessory box from the carton.
CONTENTS:
In your container, you will find one (1) MK-370 cutting surface and water pan, one (1) MK-370 cutting head,
(1) 7-inch wet cutting continuous rim diamond blade, one (1) splash guard, one (1) splash guard washer, one
(1) splash guard wing nut, one (1) electric water pump, one (1) pump discharge fitting, one (1) blade wrench
one (1) shaft wrench, one (1) owners manual, one (1) pump manual and one (1) warranty card.
MK-370 Cutting
Surface
MK-370
Cutting Head
Diamond Blade
Splash
Guard
Splash Guard
Washer
Splash Guard
Wing nut
Electric
Water Pump
Pump
Discharge Fitting
Blade Nut
Wrench
Shaft
Wrench
Owners
Manual
Pump
Manual
Warranty
Card
TRANSPORT:
1. The MK-370 weighs approximately fifteen (30) pounds for ease of transport.
2. Never transport the MK-370 with water in the Water Pan.
To lift the saw, grasp the Water Pan by the front and back, and then lift the entire saw.
NOTE: The Cutting Head end will be heavier than the opposite end.
Cutting Head
Lift Point
Lift Point
