MK-370
Revision 06/05, Effective Date June 17, 2005
Page 24
MAINTENANCE AND TROUBLESHOOTING
MAINTENANCE:
1. Monthly Maintenance:
The following maintenance should be performed monthly.
2. Lockout:
The MK-370 is equipped with a lockout device that can be used during maintenance and troubleshooting to
render the saw in operable. The lockout can also be used to prevent unauthorized use.
(E)
Verify the Roller Wheels are
tight
(B)
Clean the Motor Shaft
(C)
Lubricate the Motor Shaft
Motor Shaft
(A)
Remove and clean the Inner
and Outer Flanges and the
Blade Retaining Nut
Retaining
Nut
Flange
(D)
Verify the Movable Cutting
Table Roller Wheel Assembly
is tight
(F)
Verify the Cutting Head
Assembly Retaining Screws
are tight
Retaining
Screws
Motor Shaft
Roller Wheel
Assembly
1/2-inch
Wrench
Roller Wheel
1/2-inch
Wrench
(B)
Lockout the Saw by removing
the Lockout Pin
(A)
Locate the Lockout Pin in the
center of the ON/OFF Switch
toggle (the Lockout Pin has
"Remove To Lock" highlighted)
Lockout Pin
installed
ON/OFF
Switch
Lockout Pin
removed
ON/OFF
Switch