MK-370
Revision 06/05, Effective Date June 17, 2005
Page 12
UNPACKING, TRANSPORT, UNIVERSAL STAND and ASSEMBLY
ASSEMBLY:
Follow the assembly instructions to prepare your MK-370 for operation.
1. Stand Setup:
The MK-370 weighs approximately thirty (30) pounds; follow the guidelines for transport in the
TRANSPORT section, when placing it on the stand.
2. Cutting Head Installation:
(D)
Verify the Saw is seated on the
Crossbars of the Stand
(A)
Open the Universal Stand and
place on flat surface
(B)
Orient the Saw to the Stand
(C)
Seat the saw onto the Stand
Saw
Stand
Center Saw
over the
Stand
Seat
Saw
Saw
Stand
Verify the Saw
is seated
Crossbar
(A)
Loosen the Blade Guard
Retaining Knob
(B)
Remove the Blade Guard Wing
nut and then remove the
Blade Guard
(C)
Locate and remove the three
Cutting Head Retaining Screws
using a Phillips Screwdriver
Turn counter-
clockwise to remove
Retaining
Knob
Wingnut
Turn counter-
clockwise to remove
Blade
Guard
Retaining
Screws
