MJ Research PTC-0200, Operation Manual

Page: 74 / 143

7-4 7-4 7-4 7-4 7-4
DNA Engine & DNA Engine Tetrad Operations Manual
Inserting a New Step
To insert a new step, select Insert from the Edit Menu, then press «
Pro-
ceed
». The Enter Menu will be displayed for the new step (a new step 2
is added in the example below):
Use the Enter Menu to create the new step (see “Entering the Program’s
Steps,” chapter 6). When the step is complete, select
Yes from the confir-
mation menu, then press «
Proceed
». The program being edited will be
displayed again, with the new step appearing among the listed steps.
Deleting a Step
To delete a step, select Delete from the Edit Menu, then press « Proceed ».
The step will immediately be deleted, and the program being edited will
be displayed again, minus the deleted step.
To cancel a deletion, see “Cancelling Editing Changes,” p. 7-5.
Note: Note:
Note: Note:
Note: Be careful when using Delete . Once a step has been deleted, it
cannot be recovered without abandoning all editing changes that have
been made in the program. This could be inconvenient if the program
has been extensively edited.
Adding an Option
To add an option to a step, select Option from the Edit Menu, then
press «
Proceed
». The option menu will be displayed for the step. Add
the desired option to the step (see “Modifying a Program Step with
the Options,” chapter 6). When the option is complete, select
Yes from
the confirmation menu, then press «
Proceed
». The steps of the pro-
gram being edited will be displayed again, with the new option ap-
pearing in the list.
Saving an Edited Program
To save an edited program, use the right «
Select
» key to scroll to the End
step of the program. Position the cursor on the number for the step, then
Edit: CUSTOM1
Step 2= _TEMP GoTo
Ramp End